«

»

1972 Triumph X75 Hurricane

Sweepstakes 620x275

It seemed to hit all at once. In 1967 a big, high performance bike was a 650 Triumph or a Harley Sportster. Then all hell broke loose about 1968 with the Norton Commando Fastback, and soon after the 750cc Triples from BSA and Triumph followed by the Honda CB750 and H1 Kawasaki. By 1973 there were the H2 and then Z1 Kawasakis, and the Suzuki GT750 Triple thrown in for a little flavor. Never had motorcycling seen such rapid evolution, and one-upsmanship in such a short period of time. In 1969 in an effort to extend the niche of the new BSA Triple, the Rocket III, and keep up with the pace of change, American designer Craig Vetter was given a BSA Rocket III to experiment with. The fantastic X75 Hurricane was the result.

Sweepstakes 620x275

BSA was out of business by 1973 and Norton was nearing its end. Competition from Japan was strong. The American market was extremely important to British bike manufacturer Triumph. It’s said that what Triumph was after was a chopper version of its 750cc triple to feed the styling trend fueled by Easy Rider; extended front ends, skinny front wheels and upswept exhaust were happening in the motorcycle scene. But working in glass fiber reinforced resin and plenty of chrome, schooled and knowing Craig Vetter gave them instead a more lasting look.

Sweepstakes 620x275

The standard Rocket III’s front end was slimmed by removing the fork gaitors and using an abbreviated chromed fender with light wire stays. Keeping the headlight high adds to the impression of long forks, which were extended about an inch over stock. The fuel tank, a sleek but too small two and a half gallon sculpture necked down to transition into integrated side-covers, then a seat pan. Upswept exhausts add motion and visual weight to the rear of the bike, though right side ground clearance was a problem.

 

A somewhat impractical styling exercise that hit late in the reign of the British motorcycle, more expensive than a standard Triumph Triple, the Hurricane was slow to sell. About 1200 Hurricanes were made. They are now highly collectible for their unique style by an American designer, Craig Vetter, and today prices are increasing rapidly.

 

Specifications
Engine OHV Three Cylinder
Bore & Stroke 67mm x 70mm
Displacement 744cc’s
Carburetors Thre 27mm Amals
Horsepower 58
Primary Duplex Chain
Transmission 5-Speed
Electrics 12 Volt
Suspension Telescopic Fork / Dual Shock, Swingarm
Wheels/Tires 3.25 x 19 / 4.25 x 18
Wheelbase 57 Inches
Brakes Drum; 200mm / 175mm
Weight 465 Pounds
Top Speed 115 MPH

 

On Loan to the National Motorcycle Museum from Jerry Rewerts   -   L35

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>