«

»

1970 Harley-Davidson Rapido ML-125S

1970-harley-davidson-rapido_1

Owning controlling interest in the established Italian motorcycle manufacturer Aermacchi gave Harley-Davidson a wide range of small and middleweight, “entry level” machines for their line-up, including 50cc and 125cc two-strokes.

This version of the Rapido is a handsome lightweight two-stroke with off-road or “enduro” styling popular in America at the time. The high bars, upswept exhaust, grab rail and candy apple red paint helped attract a new audience not served by the other road racing inspired 125cc Rapido.

In the 1960’s Americans were introduced to a wide range of new small and cheap motorcycles from Honda, Yamaha and the other Japanese and Italian makers. Having dropped the 165cc line-up including the Scat, Pacer, Ranger and others based on the Post-War DKW/Hummer design, Harley-Davidson offerings were by then all roughly 900cc and larger machines, heavy weight and relatively expensive. Seeking a quick fix for the market share they gave up to foreign makers, Harley bought a controlling interest in Aermacchi about 1960. With this arrangement machines with displacements ranging from 50cc’s to 350cc’s became available in two-stroke and four-stroke models including those commonly referred to as Harley-Davidson Sprints and Rapidos; highly successful CRTT race bikes were in the mix as well.

The relationship with Aermacchi was so good that Harley-Davidson won its only Grand Prix championships, 1974, 1975, 1976 with 250 and 350 wins by Walter Villa on the RR250 and RR350 two-stroke twin road racers manufactured by Aermacchi. Harley-Davidson worked with Aermacchi through 1978 when Cagiva purchased the company.

This Rapido is in the large Harley-Davidson display area at the National Motorcycle Museum. It was perfectly restored then graciously donated a few years ago by Michael Yourtz of Denver, Colorado. A wide range of two-stroke and four-stroke Aermacchi sourced Harley’s is on display at the Museum.

Specifications:

  • Engine: Air-Cooled Single
  • Type: Two-Stroke, Piston-Port Induction
  • Bore & Stroke: 52 mm × 58 mm
  • Displacement: 124cc’s
  • Compression Ratio: 6.6 : 1
  • Ignition: Magneto
  • Carburetor: Dellorto
  • Starting: Kick
  • Horsepower: 11
  • Primary: Gear Driven
  • Clutch: Wet, Multi-Plate
  • Final Drive: Chain
  • Transmission: 3-Speed
  • Frame: Single Down Tube, Steel
  • Suspension: Hydraulic Fork / Swingarm, Dual Shocks
  • Brakes: Drum Front / Drum Rear
  • Wheelbase: 48 Inches
  • Wheels / Tires: 3.00 x 19 /. 3.50 x 18
  • Weight: 225 Pounds
  • Top Speed: 55 MPH
<
>

5 comments

Skip to comment form

  1. James

    What’s with the two sprockets on the rear wheel?

  2. Howard Dorris

    It is four speed.
    Two sprockets High and low range

  3. Howard Dorris

    It is four speed.
    Two sprockets High and low range

  4. EmailRon Widman

    Theory was small sprocket for normal road work. Bigger sprocket lower overall gearing = more low speed pulling power and lower top speed. A greasy job that most were not willing to do . Plus the fact that you had to mix your own oil with the fuel made these a little less appealing when the competition offered oil injection .

  5. FirstGladys

    I have noticed you don’t monetize your site, don’t waste your traffic, you can earn additional bucks every month because you’ve got high quality
    content. If you want to know how to make extra $$$, search for: Boorfe’s tips
    best adsense alternative

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>